The Mercury Mercruiser 3.0L is one of the most popular sterndrives on the planet. It is the ideal choice for runabouts up to 19 feet. There are two variants of the engine available; a carbureted version and a multiport fuel injected version.
 |
 |
| Multiport Fuel Injected |
Carbureted |
SPECIFICATIONS
| HP / kW |
|
| Maximum RPM (WOT) |
|
| Engine type |
|
| Displacement (L) |
|
| Bore and stroke |
- 4.00 x 3.60″ / 101 x 91 mm
|
| Compression ratio |
|
| Recommended fuel |
- Unleaded Regular 87 Octane Minimum (R+M/2) or 90 RON 10% Ethanol Maximum
|
| Engine control system |
- PCM 09 with SmartCraft CAN capability OBD-M diagnostics Dual oxygen sensors
|
| Fuel delivery system |
- Multi-point Electronic Fuel Injection (MPI) or
- 2V carb with turn-key start and electric fuel pump
|
| Air induction |
- Single piece iron intake with 56mm throttle body
|
| Ignition |
- Crank fired high voltage switch with knock control
|
| Alternator amp / Watt |
|
| Water drain system |
|
| Exhaust system |
- Electro-deposition paint coated iron manifold with dry joint elbow
|
| Cooling system |
|
| Accessory drive system |
|
| Recommended oil |
- NMMA Certified FCW 25W-40 Synthetic Blend
|
| Engine guardian system |
- Knock control
- Low drive lubricant
- Low oil pressure
- Low voltage
- Low water pressure
- Over-rev
|
| Dimensions (L x W x H) |
- 29 x 26 x 21″ / 730 x 660 x 533 mm
|
| Weight (engine only) |
|
| Compatible drives |
|